Reliable indirect competitive ELISA used for a survey of ochratoxin A in green coffee from the North of Paraná State, Brazil.

The performance of an indirect competitive enzyme-linked immunosorbent assay (ic-ELISA) based on a monoclonal antibody (mAb) for ochratoxin A (OTA) detection was evaluated in a comparative study with high-performance liquid chromatography (HPLC) analysis using 68 freshly harvested coffee samples from the North of Paraná State, Brazil. The anti-OTA mAb showed high specificity and low cross-reactivity with OTA analogues (OTB and OTalpha), but cross-reacted with OTC. This ic-ELISA showed a detection limit of 3.75 ngg-1 sample, when compared to 0.80 ngg-1 by HPLC, with an ic-ELISA/HPLC correlation coefficient of 0.90. As regards OTA analysis of these coffee samples, natural contamination was detected in 10 samples (14.7%) by both methods, where the ic-ELISA values (range 3.9-7.3 ngg-1) were 1.1 to 1.6-fold higher than HPLC data (2.7-4.7 ngg-1). Five samples (7.4%) were OTA positive (range 0.84-1.30 ngg-1) only by HPLC assay, probably due to the higher detection limit reached by ic-ELISA. OTA was undetectable in 53 samples (77.9%) by both methods, while all positive samples (range 0.84-7.30 ngg-1) showed OTA levels lower than 8 ngg-1 (maximum limit recommended by the European Union). The matrix interference of green coffee was minimized by dilution of sample extracts before carrying out the ELISA assay. This mAb-based ic-ELISA can be effectively applied for OTA screening in coffee, because it is simple, sensitive and sample preparation is easy.     

The DSC thermal analysis of crystallization behavior in high erucic acid rapeseed oil

DSC isothermal analysis is used to investigate the crystallization behavior of high erucic acid rapeseed oil (HEAR oil) in conjunction with usual cooling and heating methods. The crystallization of HEAR oil is found to be in two stages and which are accounted for by the crystallization of the α form and its transformation to theβ form under isothermal cooling conditions. Theα form is also transformed to theβ form under constant heating rate conditions (10 K/min), but this transformation is governed by the heating rate. The crystallization behavior of HEAR oil appears to be dominated by its characteristic triglyceride structure as the transformation is completely altered by random interesterification. Further, when HEAR oil is blended with SBO, the crystallization is changed as the SBO component is increased.     

Mechanical properties of glassy carbon fibres derived from phenolic resin

Mechanical properties of glassy carbon fibres produced from a phenolic resin were determined by static tensile testing. These specimens are of special interest because they consist of an isotropic core surrounded by a sheath of oriented material of varying relative thickness. The chemistry of pyrolysis of the resin is summarized and the changes in mechanical properties of the fibres are discussed in terms of the pyrolysis mechanisms. The results are compared with hardness measurements made on discs produced from the same starting material. Scanning electron microscope studies revealed that the fibres have various types of flaws both in the surface and in the core. The effect of these flaws on the fibre strength is discussed by applying Griffith crack theory.     

Detection of characteristic signals from as-doped (<1 at.%) regions of silicon by transmission electron microscopy and convergent-beam electron diffraction

Characteristic signals were detected from As-doped (< 1 at.%) regions of silicon by dark-field transmission electron microscopy and convergent-beam electron diffraction. A slight intensity increase was observed in 220 dark-field images, which may be explained by an increase of scattering amplitude due to the As doping. The doped region showed a much higher intensity in 004 dark-field images. The characteristic high intensity was observed for specimens with As concentrations of about 0.09-0.8 at.%. Convergent-beam electron diffraction patterns obtained from the As-doped region showed a characteristic rocking curve for 004 reflection. These characteristics should originate from incoherent elastically scattered electrons due to a static lattice distortion around the doped As atoms. The observed characteristics in dark-field images and rocking curves of the 004 reflection should be a good probe not only for investigating the concentration of doped atoms in Si lattice, but also for the amount of impurity and/or point defects in other crystalline materials.     

A stiffness adjustment mechanism maximally utilizing elastic energy of a linear spring for a robot joint

This paper proposes a mechanism that adjusts mechanical stiffness around a robot joint and utilizes whole elastic energy of an elastic element. The proposed mechanism consists of a lead screw mechanism, a linear spring, and wires. The lead screw mechanism moves a nut of the lead screw mechanism to change a bending point of the wire, which connects the linear spring and the lead screw mechanism. Then, moment arm and ratio of joint rotation to extension of the spring are varied. As a result, joint stiffness is adjusted. Because this mechanism does not apply tension to the spring for the stiffness adjustment, whole elastic energy of the spring can be utilized for joint rotation. This utilization can minimize weight and size of the elastic element. Additional advantages of the proposed mechanism are mechanical simplicity, wide range of adjustable stiffness, and no energy consumption for keeping constant stiffness. We analyze characteristics of the proposed mechanism and compare with other mechanisms in detail. Device development and experimental results are provided for demonstrating the effectiveness of the proposed mechanism.     

Architectures for ATM network survivability and their fielddeployment

Future networks must offer extremely high levels of reliability because information has become critical to the continued well-being of society. This article shows the approaches to the survivable ATM network. The reliability requirements of future networks are discussed first. Development results of three typical restoration architectures (automatic protection switch (APS), self-healing network (SHN), and failure-resistant virtual path (FRVP)) for ATM networks are then shown. Next, we describe current progress in standardization activities. They also discuss open issues that must be resolved in future studies     

Development of a Compact-Sized Falling Needle Rheometer for Measurement of Flow Properties of Fresh Human Blood

A compact-sized falling needle rheometer with rapid operation and automatic flow analysis has been developed for viscometry of fresh human blood without anticoagulant. The volume of a fresh blood sample only needs to be 3 mL, and the measuring time is within 2 min after taking a blood sample from the human body. Measured flow properties of human blood are evaluated as a flow curve, that is, the relationship between the shear stress (τ) and shear rate (γ). Observed flow curves of fresh human blood show three typical fluid regions, that is, the Casson fluid region for a low shear rate range of 0 < γ > 140 s^?1, the transition region for a shear rate near 140 s^?1 < γ < 160 s^?1, and the Newtonian fluid region for a high shear rate range of 160 s^?1 < γ > 400 s^?1. Flow properties of human blood such as the yield stress (τ _y) in the Casson fluid region and the apparent viscosity (μ) in the Newtonian fluid region are measured, and they are compared between male and female blood. It is found that the range of human blood viscosity for males is (5.5 to 6.4) mPa · s, and for females is (4.5 to 5.3) mPa · s. The viscosities of male blood without anticoagulant show higher values than those of female blood. Human blood viscosities with anticoagulant show a lower value than that without anticoagulant. A linear relationship between the hematocrit value, that is, the volume percentage of red corpuscles in the human blood, and the apparent viscosity are observed for both male and female blood. This article is concerned with the flow analysis of fresh human blood viscosity without anticoagulant using a newly developed compact-sized falling needle rheometer.